PRODUCTS

Details

Introduction

Follow the steps in this guide to replace the FaceTime camera and sensor assembly flex cable in an iPhone 6s Plus.

• Remove the following three Phillips screws:

• Two 2.7 mm screws

• One 1.4 mm screw

• Remove the earpiece speaker bracket.

• Use the flat end of a spudger to lift the FaceTime camera out of its housing.

• Pull the FaceTime camera back and remove the earpiece speaker.

• Use the pointed tip of a spudger to lift the ambient light sensor from its housing in the front panel.

• Insert the pointed tip of a spudger between the microphone flex cable and the front panel to break the adhesive holding it in place.

• Use the flat tip of a spudger to lift up the microphone and earpiece gasket.

• Remove the FaceTime camera and sensor assembly.

Products Sort