News

*************************** DISCLAIMER ********************************
This tool has only been tested by me. It worked for me. While great care
has been taken, this tool may contain bugs and therefore may seriously
harm your HDD. Use at own risk !!!
*************************** DISCLAIMER ********************************

What:

This tool will allow you to use HDD's that are not 'certified' by Microsoft.
This specific tool is written for use with the Western Digital BEVS series
only !

How to use:

Get yourself a Western Digital SATA BEVS HDD. To use this tool, you need
a HDD security sector file ('hddss.bin'). If you don't have one, here's how
to create one from a valid xbox 360 HDD:

* Dumping the hddss.bin file *
Boot to dos from a writeable medium (like a floppy). Connect an *original*
xbox 360 HDD to your SATA controller. Make sure it is the only SATA device
that is connected. Now run 'hddhackr -d'. This will create a file 'hddss.bin'
and it will save it to the path you've started the hddhackr from.

* Modding your Western Digital *
Now turn off your PC and connect the Western Digital and boot to dos again.
Type 'hddhackr -f' from the same path you have saved the hddss.bin file to.
This will flash your FW. It will ask if you want to create an undo file. It
is advised to do so. This will create an  'undo.bin' file that you need if
you want to undo the hack.

* Check if it worked *
Shut down your pc, reboot again to dos and again type 'hddhackr -f'. It
should now tell you that the drive should work in your x360. If so, connect
it to your x360 and go to your dashboard/system/memory where you should be
able to format the drive.

* Restoring your WD to original state *
If you don't want to use your modded WD in your x360 anymore and you want to
flash it back to its original size, then you can now do so. Boot to dos again
and run 'hddhackr -u'. This will use the undo.bin file you created before to
restore the drive to its original state.

Download:
Hddhackr 0.91
120GB Hddss

LASER-HL

Products Sort